Project
RFFI № 16-03-00063 «A»
Sorption concentration and extraction of radionuclides from technogenic and natural environments using inorganic sorbents based on nanodispersed metals Project leader: Avramenko V.A.
One of the most important problems of modern radiochemistry and radioecology is the creation of effective sorption technologies for the purification of industrial waste containing radionuclides, followed by their concentration using promising sorption import-substituting materials. At the same time, to solve the mentioned problems, the greatest interest is in the synthesis, study of physicochemical and sorption properties and the use of inorganic inexpensive sorbents with high sorption capacity, mechanical, radiation and oxidative resistance. This project is focused on developing methods for producing highly porous inorganic sorption materials based on natural or available mineral-like support matrices (MnO2, Al2O3, Fe2O3Fe3O4, etc.) with nanodisperse Fe(0), Cu(0), Se(0) doped into their volume. Upon contact of the mentioned sorbents, a redox transformation of the mentioned doped metals into hydroxide forms occurs, which quantitatively capture the most dangerous radionuclides Cs-137, Sr-90, Co-60, U-238, which are in solution in the form of hydrated cations, using reagent adsorption methods. Primary experiments show that due to the high dispersion of doped particles Fe(0), Cu(0), Se(0), its high content in the matrix, the distribution coefficient during sorption exceeds 10 to the power of 6 cm3/g in relation to uranyl ions in natural waters, depending on conditions. In this case, the stabilization of nano-sized particles of elements in the zero oxidation state occurs through the porous structure of ceramic matrices. Ceramic matrices – carriers obtained by methods, for example, electric pulse sintering (SPS – process), remain extremely stable even in acidic solutions when heated, and reliably retain doped components of the sorbent. The project plan includes: (1) searching for the most stable inorganic matrices in complex aggressive environments (0.1-3.0 mol/l HNO3 or NaOH), primarily based on oxide ceramics; (2) development of methods for obtaining and producing nanodispersed Feo, Cuo, Seo with particle sizes from 10 to 30 nm; from 30 to 80 nm; and >80 nm, as well as methods for their passivation and storage in the presence of atmospheric oxygen; (3) search for conditions for solid-phase dosed and reliable fixation of nanoporous additives to the carrier matrix by various methods; (4) search for the main mechanisms of sorption concentration of radionuclides on the surface and in the volume of the sorbent; (5) studying the physicochemical properties of the resulting sorbents and searching for optimal conditions for their use for concentrating a number of radionuclides from complex salt systems; development of theoretical models of reagent sorption that describe the dynamics of sorption of radionuclides in the sorbent layer; (7) testing of the obtained sorbents in radiochemical practice. The main expected result of the project will be the production of original import-substituting inorganic sorbents with high capacity and mechanical strength, containing Fe, Cu and Se nanoparticles of a given dispersion and content, which, under conditions optimized during the project, will be used in radiochemical practice for the purification of radioactive waste of low and medium levels of activity, natural objects using reagent concentration methods of dangerous radionuclides.