Project

RFBR No. 19-33-90078 “Graduate students”

Development of ceramic matrices with adjustable physicochemical and improved immobilization characteristics using reaction-spark plasma sintering technology Project manager: Papynov E.K.

Thermodynamically stable ceramic materials, based on their totality of physical and chemical characteristics, represent a direct alternative to vitrified radioactive waste. Solid-state matrices based on them are promising for solving important technological problems associated with the immobilization of radiation-hazardous heat-generating radionuclides cesium-137 and strontium-90 during their concentration and burial, as well as in the manufacture of matrix-carriers of radionuclides in the form of radioisotope products (for example, active zones of ionizing radiation sources). In view of the constant tightening of requirements for the quality of matrices of radionuclide composition, there is an urgent need to improve their operational characteristics using various scientific and technical solutions. In this regard, this project is aimed at solving the fundamental problem of developing new ceramic matrices with adjustable physicochemical, mechanical characteristics and improved immobilization properties, ensuring resistance to leaching of cesium-137 and strontium-90 radionuclides. The originality of the scientific approach lies, firstly, in the selection of raw materials with a high capacity for containing radionuclides and capable of solid-phase transformations with the formation of a stable ceramic base. Secondly, it is proposed to use non-traditional modern technology of reaction spark plasma sintering (R-SPS) as the main approach for the formation of ceramics. Based on the results of the project, it is expected for the first time to obtain ceramic matrices of radionuclide filling based on tungstates (Cs,Sr)WxOy and aluminosilicates (Cs,Sr)AlxSiyOz, through the reaction “in situ” interaction of the initial raw materials components under conditions of spark plasma heating. The uniqueness of the matrices being developed will be determined by adjustable physicochemical and operational characteristics, such as high capacity of radionuclides 137Cs and 90Sr (more than 40 wt.%), required dosed activity of 5%, density (more than 98% of theoretical), low rate of leaching of radionuclides (less than 10-6 g/cm2*day), high strength and long service life that meet the requirements of Russian and international standards.

In the project, the R-IPS method will be used for the first time and a finished product of the required geometric shape, size and profile will be obtained, in the form of volumetric ceramics or coating in the design of a closed or open type ionizing radiation source, with the exact radionuclide content. The project provides for the development of previously unestablished fundamental knowledge about the processes of R-IPS synthesis of ceramics of the specified compositions, taking into account the specifics of the formation and changes in their physicochemical characteristics and operational properties. The result of the research is modern scientifically based solutions necessary for fundamental and applied science.

Back to section